How to set your Davis Skeleton watch

Follow the instructions below to set up your Davis Skeleton watch:

1 . Setting the time ➡️ Pull out the time setting crown and turn clockwise.

➡️ Push the setting crown back in when the time setting is complete.

2 . Winding a Mechanical movement ➡️ The setting crown must be in the initial position either fully pushed in.

➡️ Load The movement by turning the crown clockwise and make between 30 and 40 rotations.

Your Davis Skeleton watch is now running perfectly for 24 to 36 hours.

Write a comment

All comments are moderated before being published